Top 10 usual forklift accidents ， forklift procedure ought to take notice of these issues ！.

Don't undervalue the forklift at work. If the operation is not good, there will be major mishaps in minutes, and there are numerous mishaps including forklifts.

Situation 1: The forklift cargo obstructed the vehicle driver's view, and the individual ahead can not be located, causing a moving mishap.
Situation 2: In order to preserve the balance of the forklift when lifting heavy items, the staff members utilized their body weight as the weight, which nearly triggered casualties.
Situation 3: The width of the forklift cargo goes beyond the allowed size of the path and hangs on the roadside rack, which virtually creates an crash.
Situation 4: Forklift is speeding and rolls over throughout a turn.
Instance 5: The forklift motorist did not discover the pedestrian, and the pedestrian did not discover the forklift.
Case 6: The forklift raises the workers illegally, the forklift vehicle driver does not put on the seat belt, the forklift lifter falls and the vehicle driver is squashed when the forklift rolls over.
Instance 7: The forklift motorist did not wear a safety belt and dropped from the car when it surrendered and was squashed.
Forklift operation need to take notice of these matters ：.

Start.
1. Prior to starting, observe the environments, and after verifying that there are no barriers that impede the safety of driving, beep the horn first and afterwards start.
2. For lorries with hydraulic (air pressure) brakes, the brake hydraulic stress (air pressure) scale should be safe prior to beginning.
3. When the forklift starts with a lots, the chauffeur should first validate that the tons is secure and reputable.
4. The start needs to be slow-moving and stable.

Driving.
1. When driving, the elevation between the bottom end of the fork and the ground must be maintained 300mm-400mm, and the mast needs to be tilted backwards. .
2. Do not raise the fork too high when driving. When going into and leaving the work site or while driving, beware that there will certainly be no obstacles in the sky. When the lots is taking a trip, the fork should not be elevated expensive, which will impact the security of the forklift. .
3. After unloading, the fork ought to be reduced to the regular driving position before driving. .
4. When transforming, if there are pedestrians or lorries nearby, the driving signal ought to be provided initially. High-speed doglegs are prohibited. High-speed sharp turns will trigger the lorry to shed side stability and tip over. .
5. When the forklift is downhill, it is strictly prohibited to shut off the fire and slide, and it is restricted to brake suddenly while driving with loads unless there are special scenarios.
6. When the forklift is running, it needs to comply with the website traffic rules in the factory and must keep a certain safety distance from the car in front. .
7. When the forklift is running, the load should be in the lowest position that does not hinder the driving, and the gantry should be properly tilted back. The lots shall not be raised except when stacking or filling. .
8. The height of the lots need to not obstruct the chauffeur's sight. In unique scenarios, when the thing affects the forward vision, drive at a reduced rate when turning around.
9. It is prohibited to turn on the ramp, neither to drive across the ramp. .
10. The secure driving speed of the forklift in the factory area is 5 km/h, and it needs to drive safely at a reduced speed when getting in the manufacturing workshop location. .
11. When the forklift is raised, lifted or driven, it is restricted for employees to stand on the fork to hold products and play a stabilizing function. .
12. If troubles are located, they will certainly be repaired and reported in a prompt fashion, and they will certainly never ever run with health problems or hide them.

loading and dumping.
1. When fork-loading things, the range in between the two forks should be adjusted as needed to make the lots of both forks well balanced and not skewed, and one side of the product should be against the shelf. .
2. It is forbidden to deal with a single fork or utilize a fork top or draw. In unique conditions, security warning signs have to be established to remind bordering pedestrians. .
3. In the process of packing and unloading items, the forklift needs to be braked with the brake. .
4. The rate of the automobile must be sluggish and steady. Be careful not to roll the wheels on the dunnage, so as not to stretch Stand-on Electric Pallet Stacker the rolled things and hurt individuals. .
5. When utilizing a fork to fork the goods, the fork should be as deep as feasible under the load, and it needs to be noted that the fork idea should not touch various other items or objects. The lots needs to be maintained with very little back tilt of the gantry to make sure that the load does not glide in reverse. The pole can be slanted forward somewhat when the tons is decreased to enable very easy placement of the tons and removal of the forks. .
6. It is forbidden to fork products at broadband and hit hard objects with the fork head. .
7. When the forklift is working, it is forbidden for individuals to loaf the fork, so regarding avoid the collapse of the goods and hurt individuals. .
8. Straining is restricted, and it is restricted to make use of forks to raise personnel to take part in high-altitude operations to prevent high-altitude falling crashes. .
9. It is not enabled to use the brake inertia to slip, place, round or roll objects. .
10. It is not allowed to utilize forks to choose, transform pallet unload.

Leaving .
1. It is forbidden to leave the forklift when the products on the fork are in the air. Before leaving the forklift, you must unload the goods or lower the fork frame.
2. Draw the parking brake manage to dead or dispirit the hand brake switch.
3. The engine is switched off and the power is removed. (Except for special situations, such as the motorist does not leave the vehicle's line of sight and does not surpass 1 minute).
4. Eliminate the secret. .

Forklift Operation Precautions.
1. Prior to and after the forklift procedure, the appearance must be examined, and gas, lubing oil and cooling water should be added.
2. Check the safety performance of starting, running and braking.
3. Inspect whether the lights and horn signals are total and efficient.
4. Throughout the procedure of the forklift, inspect whether the pressure and temperature level are typical.
5. After the forklift is running, the outside leakage ought to likewise be checked and the seals ought to be changed in time.

Forklift Safety Operation Specifications.
1. You need to inspect before leaving the vehicle;.
2. When you run into someone before you during driving, you must send a signal at a distance of 5 m;.
3. The driving speed in the manufacturing facility does not go beyond 5 km/h;.
4. When driving, the nadir of the cargo should be 0.3 m ~ 0.4 m above the ground;.
5. The turning must not be Electric Forklift Truck for Warehouse as well sharp to prevent the propensity of " totally free switching";.
6. Running up and down the slope must be slow-moving and consistent, and no turning on the slope is allowed.
7. Do not drive across the slope. When the slope is higher than 10%, the vehicle ought to be driven backwards when declining;.
8. When the forklift employees lug the goods and move on, if they encounter large or heavy items and go to the chauffeur's line of vision, they ought to take the reversing exercise
.
The "Eight Prohibitions" must be adhered to in the operation.
1. Solitary fork operation is not permitted.
2. It is not enabled to raise the goods for long distance driving.
3. It is not enabled to get the goods by handing over the pallet with the fork.
4. It is not allowed to directly shovel chemicals, flammables and various other hazardous chemicals with forks.
5. It is not permitted to make use of inertia force to grab the goods.
6. It is not enabled to make use of braking force to expatriation round or easy-to-roll items.
7. It is not enabled to bring individuals to work on the pallet or fork, and it is purely prohibited to stand under the fork after the fork is increased.
8. Do not drive laterally on inclines
.
Car park is not permitted under the list below problems.
1. Contours, narrow roads, train crossings;.
2. Sections with a longitudinal slope more than 5%.
3. When there is an challenge on one side of the road, the contrary side of the section with the very same length as the challenge should be within 20 meters at each end.

Web：https://www.onenforklifts.com/
Email：[email protected]
Phone：+86 13827083844